All international orders, including those to Europe, now require a customs form on the package - this means you may be charged VAT and admin charges when receiving the parcel and there may be additional delays in customs.

Due to holidays no orders, except SD cards, will be posted after May 19th until June 1st - you can still place orders but there will be a delay in shipping.

Portsdown – 8 band decode PIC

£5.00

This is the pre-programmed PIC to control the custom designed 8 band decode board for the Portsdown transmitter.

The 8-band decoder is designed to work with the 8-band RF output switch and the “Portsdown 2018” software.  It is NOT required for the port 4 switch and band decoder.

It will provide switching signals (either always on, or PTT activated) to 4 Power Amplifiers and 4 transverters, and it also enables you to set which VCO filter should be switched in for the 4 transverter outputs.

Note this is for the programmed PIC ONLY

For full details see https://wiki.batc.org.uk/8-Band_Decoder

14 in stock

Sorry, but you can only purchase this item if you are a BATC member. If you are already a member, please login first, then come back here. If you are not yet a member, please consider joining us.

Join the BATC
SKU: 211 Category:

Description

This is the pre-programmed PIC to control the custom designed 8 band decode board for the Portsdown transmitter.

The 8-band decoder is designed to work with the 8-band RF output switch and the “Portsdown 2018” software.  It is NOT required for the port 4 switch and band decoder.

It will provide switching signals (either always on, or PTT activated) to 4 Power Amplifiers and 4 transverters, and it also enables you to set which VCO filter should be switched in for the 4 transverter outputs.

Note this is for the programmed PIC ONLY

For full details see https://wiki.batc.org.uk/8-Band_Decoder